Epoxy concrete resin

Epoxy resins have many unique applications in various industries, including building quality, due to their unique properties. These resins are used in the construction industry in fillers, coatings, flooring, repairers, polymer concretes, etc.
Epoxy resin and Hardener are used in modern polymer concretes. Instead of using cement as an adhesive, epoxy resin flooring for homes and Hardener are used in this type of concrete. The advantages of this type of concrete can be used for high mechanical and chemical resistance and fast strength. Hadron epoxy resin is an activator of epoxy resin flooring for drying and gaining strength and reactivity.

The ratio of epoxy domestic resin flooring to Hardener is usually one to three or one to two. Polymer concrete consists of epoxy resin floors and Hardener and aggregate section.
Iran Concrete Technical and Specialized Clinic (Green Aroma Production Company) is one of the reputable manufacturers and has a national standard of concrete additives and other building chemical products, including grout and polymer concrete.

Description:
DEZOFLOW 650 is fluid and solvent-free epoxy mortar or concrete that is designed to withstand dynamic loads with many applications.
DEZOFLOW 650 is suitable for thicknesses of 10 to 150 mm. This product is delivered in three parts and is easily mixed in the workshop, and a psychological mortar is obtained.

applications:

  • Rails and connecting cables
  • New and old car bases
  • Filling the space under the chassis and base plates
  • Structural filling of concrete holes and pits
  • Installation of industrial machinery equipment that has a constant and active pressure
  • Fixing dynamic machines on foundations
  • Installation of reinforcements
  • Equipment that has acid spills or chemical solutions
  • Regulation of concrete surfaces under flooring

points:

  • No need for primer
  • Has excellent mental health
  • Has a long performance
  • It has many tensile, flexural, and compressive strengths
  • Its adhesion to concrete and steel is excellent
  • Install and gain fast resistance
  • High resistance to active loads and chemicals
  • No shrinkage and applicable on surfaces exposed to moisture

Attributes:

  • Efficiency time: at 25 ° C for 70 minutes and 40 ° C for 40 minutes.
  • Tensile strength: 7 days, 15 MPa
  • Compressive strength: 7 days, 104 MPa
  • Flexural strength: 7 days, 27.5 MPa
  • Density: 2000 kg per cubic meter
  • Hardening: 7 days at 25 ° C and 3 days at 40 ° C

Compounds:
This product consists of epoxy resin, bisphenol A, dilute liquid hardener, and special aggregates that form a very smooth mortar after mixing and can be easily used.

Chemical stability:
The DEZOFLOW 650 is excellent against most corrosive chemicals:

  • Dilute and concentrated alkalis
  • Most dilute acids
  • Oils and petroleum products
  • Ammonia
  • Formaldehyde
  • Salt solutions
  • Mineral oils, vegetable fats

Procedure

Surface preparation:
As with other epoxy applications, proper surface preparation has a direct impact on product performance and durability. Concrete surfaces should be firm, firm, clean, and free of crust, paint, oil, grease, mold oil, and processing materials. Rough surfaces are preferred. Metal surfaces should be primed, free of rust, scaling, or rust.

Mixing:
Never attempt to distribute materials. Also, do not change the amount of resin. Mix it with a slow mixer. First, add the activator to the base resin and stir it. Make sure all the activating liquid is added to the resin.
Stir for one minute before adding the grains. Then slowly add all the powders to the mixture and stir it to get a smooth and uniform mortar. Note that excess agitation causes air to enter the mortar.
Stir for one minute before adding the grains. Then slowly add all the powders to the mixture and stir it to get a smooth and uniform mortar. Note that excess agitation causes air to enter the mortar.

Pour:
Immediately after mixing, pour in the prepared place and pour the mortar on the side that covers the minimum distance. For longer distances, it is necessary to pour the mortar from a higher height to provide the pressure needed to move the mortar.
Ensure that the mortar or concreting area is not completely blocked and that there is a way for air to escape. Pour the mortar constantly and only from one side.
Before opening the formwork, make sure that the mortar setting is complete (at least 6 hours), and if the thickness of the mortar or concreting is more than 80 mm, it is necessary to pour in several layers. Pour the second layer 6 hours after the end of the first stage.

Work tool protection:
Wash the tools after finishing work with solvent No. 2 and if there is a hardened mortar, shave it with mechanical tools.

inventory:
Keep this product away from sunlight and prevent the storage temperature from rising. In tropical areas, it is necessary to install air conditioners. If the above conditions are observed, the useful life of the product is up to one year. Failure to observe the correct storage method will damage the product or its container. For information on storage methods, consult with the technical department of Concrete Technical and Specialized Clinic Company.

safety tips:
As with all chemical products, care should be taken to avoid contact with eyes, mouth, skin, and food. In case of contact with skin and eyes, clean immediately. If swallowed accidentally. Medical procedures should be performed. Close the containers after use and refer to the product safety brochure for special storage or disposal of leftover materials.

If you need more information, contact our resin flooring company .

admin

Leave a Comment

Your email address will not be published. Required fields are marked *