Europox Z Slow

High-Adhesion Epoxy Primer for Absorbent Cementitious Substrates

Struggling with poor adhesion on absorbent floors?
This two-component epoxy primer with 100% solids content is specifically designed to deliver reliable bonding on normal to highly absorbent substrates, where standard primers often fail.

Its almost solvent-free formulation makes it a safer and more comfortable choice for applicators, while ensuring deep penetration into porous surfaces for a strong, long-lasting bond.

Why choose this epoxy primer?

• Excellent adhesion where it matters most
  Designed to penetrate deeply into absorbent surfaces, reducing the risk of delamination, blistering or premature coating failure.

• 100% solids – no shrinkage, no weak layers
  With no solvents evaporating during curing, the primer forms a dense, durable bonding layer that maximises performance of subsequent systems.

• Low odour, easier indoor application
  The near solvent-free composition allows for smoother application in enclosed or occupied environments, such as commercial or residential buildings.

• Reliable base for long-term flooring systems
  Creates a stable and uniform substrate, improving the durability and finish of epoxy, polyurethane and resin floor systems applied on top.

Recommended applications

This epoxy primer is especially suitable for:

• Cementitious screeds

• Absorbent concrete floors

• Renovation projects with variable substrate porosity

• Industrial, commercial and residential flooring systems

Application overview

1. Surface preparation
   Ensure the substrate is clean, dry and free from dust, grease and loose particles.

2. Mixing
   Thoroughly mix both components according to the recommended ratio until a homogeneous mixture is achieved.

3. Application
   Apply evenly using a roller or squeegee, allowing the material to fully penetrate the substrate.

4. Curing
   Allow sufficient curing time before applying subsequent layers or flooring systems.